FindMechanic
London areasFor garages
  • MOT centres in HayesMOT centres in RomfordMOT centres in MitchamMOT centres in EdmontonMOT centres in UxbridgeMOT centres in OrpingtonSee all →
  • Garages & mechanics in RomfordGarages & mechanics in HayesGarages & mechanics in EdmontonGarages & mechanics in RainhamGarages & mechanics in UxbridgeGarages & mechanics in MitchamSee all →
  • Mobile mechanics in CroydonMobile mechanics in BromleyMobile mechanics in HounslowMobile mechanics in MertonMobile mechanics in HaveringMobile mechanics in LambethSee all →
  • Body shops in RomfordBody shops in EdmontonBody shops in MitchamBody shops in UxbridgeBody shops in HayesBody shops in West DraytonSee all →
  • Tyres in RomfordTyres in HayesTyres in BrixtonTyres in MitchamTyres in UxbridgeTyres in EdmontonSee all →
  • BMW specialistsMercedes-Benz specialistsAudi and VW specialistsPorsche specialistsLand Rover specialistsToyota specialistsHybrid and EV specialistsSee all →
  • Guides
  • Offers
FindMechanic

The honest local guide to garages, MOT centres and mobile mechanics in London.

  • 2,667 garages listed
  • 687 DVSA MOT stations
  • 13 London boroughs
Follow us

For garages

Run a garage in London? Your listing is free.

Claim it to keep your details up to date. Nobody can pay to change a rating.

Claim your free listing

Find a garage

  • MOT centres
  • Garages & mechanics
  • Mobile mechanics
  • Body shops
  • Tyres
  • Search →

London areas

  • Croydon
  • Havering
  • Hillingdon
  • Enfield
  • Barnet
  • Hounslow
  • Bexley
  • Bromley
  • All 13 boroughs →

Specialists

  • BMW specialists
  • Mercedes-Benz specialists
  • Audi and VW specialists
  • Porsche specialists
  • All specialists →

Car problems

  • Engine warning light
  • Oil pressure warning light
  • Battery warning light
  • Engine overheating warning light
  • Brake warning light
  • Knocking or rattling noise
  • Squealing or grinding brakes
  • Whining or humming noise
  • All car problems →
  • Tyre and MOT guides →

FindMechanic

  • About us
  • How we rank garages
  • Garage offers
  • List or claim your garage
  • Contact us
  • hello@findmechanic.uk

Ratings and review counts are from Google and may have changed since we last checked (November 2026). Garages are ranked by Google rating weighted by the number of reviews; any featured listing is labelled.

MOT station data contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA active MOT testing stations.

© 2026 FindMechanic

  • Privacy
  • Terms
  • Cookies
  • Photo credits
  1. Home
  2. ›Guides
  3. ›Tyre safety and wear
  4. ›Tyre Tread Depth – The UK Legal Limit and When to Actually Replace

Tyre Tread Depth – The UK Legal Limit and When to Actually Replace

The UK legal tread limit is 1.6mm, but where is it measured? How to check your tyres, what 2mm to 5mm means, and why many replace at 3mm.

Updated 20 November 2026 · 12 min read · By FindMechanic

mechanic checking tyre tread depth on a car tyre

Need a tyre shop in London?

Compare tyre shops near you by Google rating and number of reviews, then call them direct. Free, no sign-up.

In this guide

  1. What the law actually says
  2. What are the penalties for illegal tyre tread?
  3. Why 3mm matters more than 1.6mm
  4. How much tread do new tyres have?
  5. How long will your tyre tread last?
  6. Should you change tyres at 3mm?
  7. How to check your tyre tread depth
  8. Will low tyre tread fail an MOT?
  9. What makes tyres wear faster?
  10. FAQs

Most drivers know there’s a legal minimum for tyre tread. Fewer know exactly where that 1.6mm has to be measured, and fewer still realise that a tyre can remain technically legal while its wet-weather performance has already deteriorated badly.

For cars and most light vans, the UK minimum is 1.6mm across the central three-quarters of the tread, around the entire circumference. But tyre safety experts generally recommend thinking about replacement at around 3mm, particularly if you do plenty of motorway driving or expect wet winter conditions.

Here’s what the law actually measures, how to check your tyres properly, and what 2mm, 3mm, 4mm or 5mm of remaining tread really tells you about how much life is left.

What the law actually says

For most cars and light vans used on UK roads, the legal minimum tread depth is 1.6mm.

Under Regulation 27 of the Road Vehicles (Construction and Use) Regulations 1986, the primary grooves of the tyre must have at least 1.6mm of tread:

  • throughout the central three-quarters of the breadth of the tread
  • around the tyre’s entire circumference

“Primary grooves” matters here. They’re essentially the main grooves originally moulded to the same depth as those containing the tread wear indicators. Small secondary grooves and sipes aren’t necessarily part of the legal tread-depth measurement.

The central three-quarters rule also causes confusion.

Imagine the usable tread width divided into four equal sections. The law requires sufficient depth across the middle three of those four sections. The outer shoulders sit outside that measured area.

That means a tyre with heavy shoulder wear isn’t automatically below the legal tread-depth requirement purely because the very edge measures less than 1.6mm. There may still be other reasons why the tyre is unsafe or fails an MOT, such as exposed cords, structural damage or severe deterioration.

There’s more on why worn shoulders don’t always make a tyre illegal in a separate guide.

Different classes of vehicle can have different tread requirements. Some vehicles, including certain larger passenger vehicles and motorcycles, use a 1.0mm requirement rather than 1.6mm, alongside rules about maintaining a visible tread pattern.

There’s another number worth knowing if you’re buying used tyres. A part-worn tyre offered for sale has additional legal requirements and must generally have at least 2mm of tread across the full breadth of the tread when supplied. You can read the separate rules covering part worn tyres before buying one.

What are the penalties for illegal tyre tread?

Driving on tyres below the legal tread requirement can become very expensive very quickly.

The maximum penalty is up to £2,500 and three penalty points per illegal tyre.

If all four tyres were prosecuted separately, that means a theoretical maximum of:

  • £10,000 in fines
  • 12 penalty points

For most drivers, accumulating 12 points can lead to disqualification under the normal totting-up rules, although the outcome depends on the individual case and licence circumstances.

There can also be insurance consequences.

Motor insurance policies commonly require the vehicle to be kept in a roadworthy condition. An insurer can therefore question or dispute a claim where illegal or unroadworthy tyres contributed to a collision, depending on the circumstances and the wording of the policy.

That doesn’t mean one worn tyre automatically “invalidates your insurance”. Claims are more complicated than that. But driving a knowingly unroadworthy vehicle creates a problem you don’t want to be explaining after an accident.

Why 3mm matters more than 1.6mm

The 1.6mm figure answers a legal question.

It doesn’t tell you the point at which a tyre still performs as well as you’d like in heavy rain.

Tyre tread has several jobs, but one of the most important is clearing water from underneath the contact patch. As the grooves become shallower, the tyre has less capacity to move that water away.

Wet grip suffers. The risk of aquaplaning rises. Braking distances increase.

This is why TyreSafe recommends considering replacement at around 3mm rather than deliberately running tyres all the way down to 1.6mm.

There are useful test figures behind that advice.

MIRA testing cited by TyreSafe found that cars running tyres at 1.6mm could have up to 44% longer braking distances in wet conditions than cars running tyres at 3mm.

Separate Continental testing cited by TyreSafe compared braking from 50mph in the wet. Against a new tyre with around 8mm of tread:

  • tyres at 3mm took about 2.7 metres further to stop
  • tyres at 1.6mm took about 6.9 metres further to stop

Exact results will change with the tyre, car, water depth, temperature, road surface and test conditions. That’s why a single stopping-distance number should never be treated as universal.

The pattern is what matters: wet-weather performance deteriorates substantially as tread approaches the legal minimum.

A tyre doesn’t suddenly become bad at 1.59mm and perfectly capable at 1.61mm. The legal line has to exist somewhere, but grip has already been declining before you cross it.

From FindMechanic's listings

Top-rated tyre shops in London

Choose your area →

Ranked by Google rating weighted by the number of reviews. Featured listings are labelled.

  • TYRE’D OUT 24/7 mobile tyres LTD01Number 1

    Mobile tyre fitter

    TYRE’D OUT 24/7 mobile tyres LTD

    Essex RM14 1LX

    5.0 443 Google reviews
    Call
  • PMA Tyres02Number 2MOT

    Tyre centre

    PMA Tyres

    Enfield EN1 1SH

    5.0 417 Google reviews
    Call
  • London Tyres Hornchurch03Number 3

    Tyre centre

    London Tyres Hornchurch

    Hornchurch RM11 1QH

    5.0 403 Google reviews
    Call
  • Tooting First Class Tyres04Number 4

    Tyre centre

    Tooting First Class Tyres

    London SW17 8BH

    5.0 399 Google reviews
    Call

How much tread do new tyres have?

A new passenger-car tyre will commonly have roughly 7mm to 9mm of tread, with around 8mm often used as a convenient rule of thumb.

It isn’t a fixed manufacturing standard.

The starting depth varies between tyre models and manufacturers. Winter and some all-season tyres can use deeper tread patterns, while particular performance or efficiency-focused tyres may begin with something different.

That starting point matters when you’re estimating remaining life.

An 8mm tyre isn’t “half worn” at 4mm in terms of usable legal tread. If you plan to replace at 3mm, its usable range is roughly 8mm down to 3mm. If you intend to continue to the legal minimum, the range extends to 1.6mm.

Mileage doesn’t divide neatly by millimetres either.

technician measuring tyre tread depth with a tread gauge

How long will your tyre tread last?

This is where confident online answers become misleading.

Someone will tell you that 1mm equals 5,000 miles. Someone else will say 10,000. Neither figure can tell you how quickly the tyres on your own car will wear.

Tyre wear depends on:

  • how hard you accelerate and brake
  • motorway versus urban driving
  • road surface
  • tyre pressure
  • wheel alignment
  • suspension condition
  • vehicle weight
  • driven axle
  • tyre compound
  • temperature
  • how heavily the car is loaded

Even the front and rear tyres on the same car may wear at very different rates.

Tread depth chart: what your measurement means

Current treadRough position in its usable lifeWhat to do
8mmTypical new-tyre territoryNothing to do beyond routine checks
5mmComfortable tread remainingCheck every few months
4mmClearly worn but still with a useful marginStart monitoring more regularly
3mmWet performance becoming the bigger concernBudget and plan for replacement
2mmVery close to the 1.6mm legal minimumReplace soon rather than trying to squeeze out every mile
1.6mmLegal minimum reachedReplace now; below this is illegal

How long will 5mm of tyre tread last?

At 5mm, most tyres still have a useful amount of tread available, but there’s no responsible way to convert that into one mileage figure.

If the tyre began around 8mm, roughly 3mm has already worn away. Look at how many miles the car travelled while losing those 3mm and you’ll have a much better clue than a national average.

A car doing gentle motorway mileage on correctly inflated, well-aligned tyres may wear tread much more slowly than a heavy vehicle doing short urban trips with frequent braking.

How long will 4mm of tyre tread last?

At 4mm, it’s sensible to start watching the trend rather than worrying about an exact replacement date.

If you cover low annual mileage, 4mm could represent plenty of calendar time. If you’re about to drive several thousand miles through a wet winter, you’ll want to monitor it far more closely.

This is also the point where uneven wear starts to matter enormously. A centre reading of 4mm isn’t much comfort if another primary groove elsewhere around the tyre is considerably lower.

How long will 3mm of tyre tread last?

There may still be thousands of miles of physical tread life between 3mm and 1.6mm, but that doesn’t mean you should automatically use every last fraction of it.

Published estimates for tread wear vary widely. Depending on the vehicle, tyre and use, losing one millimetre can take several thousand miles.

At 3mm, the better question isn’t “How many miles until this becomes illegal?”

It’s “What conditions will I be driving in during those miles?”

If winter is approaching, you regularly drive at motorway speeds, or you cover high monthly mileage, replacement at around 3mm becomes easier to justify.

How long will 2mm of tyre tread last?

Not long enough to gamble on an average.

At 2mm, you have only 0.4mm above the legal minimum for a normal car tyre. Wear isn’t always perfectly even, so one part of the tyre could cross the limit before the point you happened to measure.

If your tyre is at 2mm, arrange replacement soon rather than trying to calculate exactly how many journeys you can get out of it.

The best way to estimate your own wear rate

Measure the tyres today.

Record the depth and the car’s mileage.

Measure the same grooves again in roughly three months.

If, for example, a tyre has lost 0.5mm during the distance you’ve covered, you now have a real wear rate for your car, your tyre and your driving.

Keep in mind that future wear may not remain perfectly linear, but your own measurements are far more useful than somebody else’s blanket “miles per millimetre” figure.

Should you change tyres at 3mm?

Legally, you don’t have to replace an otherwise roadworthy car tyre simply because it has reached 3mm.

Practically, there’s a strong case for starting replacement at that point.

Consider changing at around 3mm if:

  • autumn or winter is approaching
  • you regularly drive in heavy rain
  • you do a lot of motorway mileage
  • your monthly mileage is high enough that 3mm could become 2mm quickly
  • the tyre is also ageing, cracking or wearing unevenly

If you drive very little and your tyres are wearing evenly, you may choose to keep monitoring them for longer. Just don’t treat 1.6mm as a target.

And if replacement cost is part of the decision, it helps to understand what the different tyre price tiers actually get you rather than assuming the most expensive option is automatically necessary.

How to check your tyre tread depth

You don’t need specialist workshop equipment to keep an eye on tread. There are three useful methods.

1. Use a tread depth gauge

A tread depth gauge is the best option for an actual measurement.

Place the probe into one of the main tread grooves and keep the base of the gauge flat against the tread block. Read the depth, then repeat the measurement.

Don’t check one groove in one location and call it done.

Measure:

  • several primary grooves across the tyre
  • several points around the circumference
  • all four tyres

This is how you find uneven wear that one convenient measurement could miss.

2. Look at the tread wear indicators

Tyres have small raised bars moulded into their primary grooves.

These tread wear indicators are positioned at the legal wear level, typically 1.6mm on passenger-car tyres.

As the surrounding tread wears down, it gets progressively closer to the top of the bar. When the tread surface becomes flush with the indicator, the tyre has reached the minimum.

They’re useful for spotting a tyre nearing the limit, but a gauge gives you much more information when you’re trying to decide between, say, 3mm and 2.5mm.

3. Use the 20p test

No gauge available? A 20p coin gives you a quick indication.

Insert the coin vertically into one of the main tread grooves.

If the outer band around the edge of the coin disappears into the tread, the tyre is likely still above the legal minimum in that location.

If you can clearly see the outer band, the tread may be too low and needs checking properly.

The key word is may.

The 20p test is a screening check, not a precise tread-depth measurement. Don’t use the width of the coin’s border to claim an exact millimetre reading.

And again, repeat the test at several points around each tyre. One good-looking section doesn’t prove the whole circumference is legal.

Will low tyre tread fail an MOT?

Yes.

For a normal car subject to the 1.6mm requirement, insufficient tread in the relevant primary grooves across the central three-quarters and around the circumference is an MOT failure.

The current DVSA MOT inspection manual treats tread depth below the required standard as a tyre defect.

But tread depth is only one part of tyre condition.

A tyre can have 5mm of tread and still be unroadworthy because of structural damage, exposed cords, a serious bulge or another defect. If you’ve spotted something like that, see whether a damaged tyre is safe to drive on.

Age-related deterioration matters too. If you’re seeing splits or weathering, here’s how to tell harmless tyre cracking from the dangerous kind.

An MOT certificate also isn’t a guarantee that your tyres will remain legal until the next test. You’re responsible for keeping the vehicle roadworthy between MOTs.

What makes tyres wear faster?

Two supposedly identical tyres can reach 3mm at very different mileages.

A few factors make the biggest difference.

Incorrect pressure: Underinflation tends to increase wear towards the shoulders, while overinflation can concentrate wear more heavily through the centre.

Wheel alignment: Incorrect toe, camber or other geometry can rapidly wear one section of the tyre. If those terms are getting mixed together, here’s the difference between tracking, alignment and balancing.

Hard acceleration and braking: Repeatedly asking the tyres to transmit large forces into the road increases wear.

Vehicle weight and loads: A heavily loaded vehicle places more stress on its tyres, particularly if pressures haven’t been adjusted correctly for the load.

Tyre construction and compound: Different tyres prioritise grip, longevity, efficiency, comfort and performance differently. Two legal tyres on the same car don’t necessarily wear at identical rates.

If tread is disappearing much faster on one tyre or one edge, find the cause rather than repeatedly replacing rubber.

FAQs

What is the legal tyre tread depth in the UK?

For most cars and light vans, the legal minimum is 1.6mm in the primary tread grooves across the central three-quarters of the tread width and around the entire circumference. Other vehicle classes can have different requirements, so the 1.6mm rule shouldn’t be applied to every vehicle automatically.

Should I replace tyres at 3mm or 1.6mm?

You don’t legally have to replace a normal car tyre at 3mm purely because of tread depth. However, wet grip deteriorates as tread wears, and TyreSafe advises considering replacement around 3mm. At 1.6mm you’ve reached the legal minimum, leaving no useful margin for further wear.

How long will 3mm of tyre tread last?

There’s no reliable universal mileage. Wear depends on the tyre, car, alignment, pressures, driving style, road surface and mileage pattern. Measure the tyre now and again after a known distance. Your own wear rate gives a much better estimate than assuming every millimetre lasts a fixed number of miles.

How much tread do new tyres have?

New passenger-car tyres commonly start with roughly 7mm to 9mm of tread, with around 8mm often used as a general benchmark. Exact new tyre tread depth varies between manufacturers, models and tyre types, so don’t assume every brand-new tyre starts with precisely the same depth.

How do I check tyre tread without a gauge?

Use the 20p test as a quick indicator. Insert a 20p coin into several main grooves around the tyre. If the coin’s outer band is visible, the tread may be low and should be measured properly. The coin test doesn’t provide an exact millimetre reading.

Can you get points for illegal tyres?

Yes. Driving with an illegal tyre can result in up to three penalty points and a fine of up to £2,500 per tyre. Multiple illegal tyres can therefore lead to multiple penalties. Keeping an eye on tread before it reaches 1.6mm is much easier than dealing with the consequences afterwards.

Tyre and wheel offers from London garages

All offers →

From the garages' own websites. Check with the garage before you book.

  • Arrow Tyres Ltd OfferEnds 30 November 2026

    £20 off two or £40 off four Continental tyres

    Bought on their website

    Code CONTI20 / CONTI40

    Arrow Tyres Ltd

    Hornchurch, Havering · 4.9 ★ (177 Google reviews)

    CallSee the offer on their site ↗
  • R&T Tyres OfferSeen 18 November 2026

    10% off wheel alignment with two or more new tyres

    R&T Tyres

    South Croydon, Croydon · 4.9 ★ (1113 Google reviews)

    CallSee the offer on their site ↗
  • Feltham Tyre Centre OfferSeen 18 November 2026

    Laser wheel alignment £38 instead of £48 with motorcycle tyres fitted

    Feltham Tyre Centre

    Feltham, Hounslow · 4.6 ★ (752 Google reviews)

    CallSee the offer on their site ↗

Find tyre shops in London

Tyre shops and mobile tyre fitters across 13 London boroughs, ranked by Google rating weighted by the number of reviews.

  • Barnet
  • Bexley
  • Bromley
  • Croydon
  • Enfield
  • Havering
  • Hillingdon
  • Hounslow
  • Lambeth
  • Merton
  • Southwark
  • Wandsworth
  • Westminster

Garage offers in London →

More on tyre safety and wear

All guides →
  • Cracks in Your Tyres – When They’re Harmless and When They’re NotCracks in your tyres? How to tell harmless surface ageing from dangerous damage, when cracked tyres fail an MOT, and how to check a tyre’s age.9 min read
  • How Long Do Tyres Last? Mileage, Age and When to Replace ThemHow long do tyres last? Typical mileage, why age matters even with good tread, how to read the date code, UK age rules and when to replace a tyre.11 min read
  • Nail in Your Tyre? When a Puncture Can Be Repaired and When It Can’tFound a nail in your tyre? When a puncture can be repaired under BS AU 159, when it can’t, whether you can drive on it, and why to leave the nail in.10 min read
  • Tyre Wear on the Outside Edge – Is It Legal, and What’s Causing It?Is a tyre worn on the outside edge legal in the UK? How the 1.6mm rule applies, when edge wear fails an MOT, and what usually causes it.10 min read
All guides →

General guidance, not a diagnosis. If you're not sure your car is safe to drive, get it checked before you go anywhere. All guides